Reviewer:
Trace from BozAngeles from Bozeman, MT United States
I have been wanting to thread my barrel for years. This kit made it so darn easy! All of the components they included were excellent quality and the job went perfect. Should have done this year‘s ago.
Was this review helpful to you?
1 of 1 people found the following review helpful:
Threading Mak 90
March 12, 2022
Reviewer:
Mak 90 guy from Henderson, NV United States
Used this to thread my Mak 90, worked great.
Was this review helpful to you?
3 of 3 people found the following review helpful:
Nice kit
October 13, 2016
Reviewer:
Ed from East Texas
Great threading kit. I did have to chase the threads on the guide first as they were slightly oversize for the die. It took me about 15 minutes to resize the guide as it was difficult to keep stationary in a vice and about 5 more minutes to thread my Mak 90 barrel. Also got a phantom flash hider and crush washer. Spun on and clocked easy. All great and reasonably priced products.
Was this review helpful to you?
3 of 3 people found the following review helpful:
Type 56 SKS
January 18, 2014
Reviewer:
Brandon G. from Mineral Wells, TX United States
Threaded the barrel of a type 56 sks 14x1LH with this kit in no time at all
The portion up past the front sight block could use 15x1R
Very happy with my purchase and service from CNC Warrior
Was this review helpful to you?
8 of 8 people found the following review helpful:
Fast shipping, good service, complete packaging.
November 10, 2013
Reviewer:
david matteson from west melbourne, FL United States
Purchased this kit online Sunday, delivered by Wednesday the same week, barrels were threaded Friday evening. :-) Kit contents: all the tools that came with the kit are quality, not cheap junk. Includes 4oz bottle of tap fluid of which I used roughly 1/2 oz to do two barrels. Other tools you will need to complete the job: bench vise, two hands to turn the die holder and possibly a friend to offer an extra set of hands but they are not mandatory. This was the first time I threaded a barrel so I took my time and slowly made the cuts, following the pdf instructions from cncwarrior website. I used a bench vise with soft jaws to hold the barrel verticle while I made the threads. I threaded the barrel of a Romanian wasr and a stamped reciever Norinco MAK-90. I attached a Tapco slant brake to both rifles after finishing and it fit like a glove. All and all, good kit, took less than an hour to thread both barrels. Very happy with the results.
MAK 90 Threading made EASY! 
